How to Fix Bootloop/Hardbrick of CherryMobile Flare 4
Hi this tutorial teach you on how to fix bootloop or deadboot for the device CherryMobile Flare 4
with chipset of mt6753 running in Lollipop 5.1. This stockrom compiled by Danielle Bote has already Rooted. Just follow this tutorial carefully.
Note: I'm not liable for any damage for your device by proceeding this you accept any liabilities.
Do it at your own risk!
Requirements:
Mediatek_Auto_Drivers.zip
USB_VCOM_Driver.rar
MediaTek_SP_Flash_Tool_V5.1532.00.zip
Rooted_Stock_Rom
Instructions:
1. Installing Drivers
1. Installing Drivers
2.) For Win 10
Install Drivers USB_VCOM_Driver.rar
Install Drivers USB_VCOM_Driver.rar
In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
3. Now Click on Next and select Install this driver software anyway and wait for finishing the process.
4. After installation is finished then Restart your computer, That's it.
5. Open flash_tool.exe, click on the Download Tab
Extract the downloaded Stock rom to desktop of your computer.
Extract the downloaded Stock rom to desktop of your computer.
6. Click Scatter-loading and browse for the scatter file (MT6753_Android_scatter)
7. For Bootloop only
Make sure flashing mode is set to "Download Only" and check mark all except Preloader.
Note: If deadboot/hardbrick set "Download+Format" and check Preloader.
Make sure flashing mode is set to "Download Only" and check mark all except Preloader.
Note: If deadboot/hardbrick set "Download+Format" and check Preloader.
9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
10. Green Circle image with check will show once flashing is completed. That's it!
11. Disconnect your phone in USB cord then open if still bootloop then try to factory reset in recovery settings. To go in recovery mode reboot your phone hold and press power on and volume up simultaneously until recovery mode appeared.
Special Thanks:
Danielle Jhay Relox Bote for stockrom
Credits:
Danielle Jhay Relox Bote
Cherry Mobile Flare 4 Tech-Support
Maximum Team
http://Androidcribs.com
Mtkdroidtools
ليست هناك تعليقات:
إرسال تعليق