Extract/Combine the 4 rom files using WinRAR on pc
Extract CDC/VCOM Driver
Extract SPFT 5.1628
Install driver CDC or VCOM (if CDC doesnt work then install VCOM or vice-versa)
Turn off the smartphone. (Cable is not connected to the computer)
Remove the battery and insert it again
Connect your phone to a "stable data cable". The operating system detects a new device
Disconnect the cable from the computer.
Open "Flash_tool.exe"
Once SPFT is launched, Click on the "Download" tab
Click "Scatter-loading" and select the "MT6592_Android_scatter.txt" file (on the DATABASE folder).
Click "Download".
Now, Connect your phone to pc using a "stable data cable" (without battery), then while pressing "volume down", insert the battery, so the pc will easily detect your phone
Once Flashing is completed, a "Green Circle with Check" will appear.
We are not responsible if anything happens to your phone. Step by Step Tutorial Fo Flashing Stock Rom(Original Firmware) Using Sp Flash Tool:
*This can fix bootloop *Phone lagness *Making back the Original Rom
1. Ready your cable and phone. Must have atleast 70% charge. Phone must be turned off. 2. All of the files are in zip file, so you need to extract them all.Better if you will make one folder for your files then extract it. 3. Enable USB Debugging mode in your phone. 4. Install all MT65xx-USB-Driver 5.Install USB VCOM Drivers In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
Now Click on Next and select Install this driver software anyway and wait for finishing the process.
4.After installation is finished then Restart your computer, That's it.
5. Open Flash tool click on the Download Tab Extract the downloaded Cherry mobile infinix XL stock rom to the new folder you created. (NOTE: I'm using other screenshots of other phone since I don't have that device though the process is still the same so no worries).
6. Click Scatter-loading and browse for the scatter file (MT6575_Android_scatter)
7. For Bootloop only Make sure flashing mode is set to "Download Only" and check mark all except Preloader. Note: If deadboot/hardbrick set "Download+Format" and check Preloader.
8. Click Download.
9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
10. Green Circle image with check will show once flashing is completed. That's it!
11. Disconnect your phone in USB cord then open if still bootloop then try to factory reset in recovery settings. To go in recovery mode reboot your phone hold and press power on and volume up simultaneously until recovery mode appeared.
In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
3. Now Click on Next and select Install this driver software anyway and wait for finishing the process.
4.After installation is finished then Restart your computer, That's it.
5. Open flash_tool.exe, click on the Download Tab Extract the downloaded Flare S4 Max stock rom to the new folder you created.
6. Click Scatter-loading and browse for the scatter file (MT6753_Android_scatter)
7. For Bootloop only Make sure flashing mode is set to "Download Only" and check mark all except Preloader. Note: If deadboot/hardbrick set "Download+Format" and check Preloader.
8. Click Download.
9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
10. Green Circle image with check will show once flashing is completed. That's it!
11. Disconnect your phone in USB cord then open if still bootloop then try to factory reset in recovery settings. To go in recovery mode reboot your phone hold and press power on and volume up simultaneously until recovery mode appeared.
How to fix bootloop Myphone My36 via Wiko Fever Firmware
This tutorial teach you on how to fix bootloop and deadboot for Myphone My36. Since we still no available stockrom for My36 we will use Wiko Fever firmware which OTA of this phone. Thisalready tested of our members. To flash this firmware you need to download all needed requirements. Just follow my instructions carefully.
1. Download Mediatek Driverand Extract then Install the driver for 32 or 64 bit operating system of windows 7.
2. Before you plug your phone in PC, you need to focus in Device Manager, then plug your phone without the battery you only have approximately 5 seconds to appear MT65xx device that shows under Other devices, you need to right click it as soon as you see it.
Then after you rightclick, click to Update driver software
3. Then choose - Browse my computer for driver software
Browse the Mediatek MT65xx Preloader Driver folder
Make sure you know the version of OS to choose the right driver for your PC.
Choose your OS version, then choose if 32-bit or 64-bit for your PC.
E.G. s Win7 folder:
usb2ser_Win7.inf - if 32-bit
usb2ser_Win764.inf - if 64-bit
4. Another options, to find right driver for your phone is to open your internet while your phone is connected without the battery and automatically searching driver for your phone.
FOR WINDOWS 8/8.1/10 -INSTALLING DRIVERS
1. Download all necessary files and Enable USB Debugging mode in your phone..
In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
3. Now Click on Next and select Install this driver software anyway and wait for finishing the process.
4.After installation is finished then Restart your computer, That's it.
If still not success in installing driver just Disabled Driver Signature Verification
1. Go to PC Settings>General>Troubleshoot>Advanced Options>Startup Settings>Disabled Driver Signature Enforcement>Then Restart
Once you disabled. Then follow the procedure above to install the driver. Once success proceed to next step.
This tutorial teach you how to fix bootloop or deadboot Myphone My32L. This firmware or stockrom of My32L need to flash via SPFT using your working USB cable and PC. Just follow our instructions carefully.
Requirements: STOCKROM PC/LAPTOP(WINDOWS OS) USB CABLE PHONE
1. Download Mediatek Driverand Extract then Install the driver for 32 or 64 bit operating system of windows 7.
2. Before you plug your phone in PC, you need to focus in Device Manager, then plug your phone without the battery you only have approximately 5 seconds to appear MT65xx device that shows under Other devices, you need to right click it as soon as you see it.
Then after you rightclick, click to Update driver software
3. Then choose - Browse my computer for driver software
Browse the Mediatek MT65xx Preloader Driver folder
Make sure you know the version of OS to choose the right driver for your PC.
Choose your OS version, then choose if 32-bit or 64-bit for your PC.
E.G. s Win7 folder:
usb2ser_Win7.inf - if 32-bit
usb2ser_Win764.inf - if 64-bit
4. Another options, to find right driver for your phone is to open your internet while your phone is connected without the battery and automatically searching driver for your phone.
FOR WINDOWS 8/8.1/10 -INSTALLING DRIVERS
1. Download all necessary files and Enable USB Debugging mode in your phone..
In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.
3. Now Click on Next and select Install this driver software anyway and wait for finishing the process.
4.After installation is finished then Restart your computer, That's it.
If still not success in installing driver just Disabled Driver Signature Verification
1. Go to PC Settings>General>Troubleshoot>Advanced Options>Startup Settings>Disabled Driver Signature Enforcement>Then Restart
Once you disabled. Then follow the procedure above to install the driver. Once success proceed to next step.
