الجمعة، 29 يناير 2016

[TUT] How to fix Bootloop and Deadboot for Myphone Rio Grande

[TUT] How to fix Bootloop and Deadboot for Myphone Rio Grande

myphone rio grande




Note:  I'm not liable for any damage for your device by proceeding this you accept any liabilities.
Do it at your own risk!


Requirements:
Mediatek_Auto_Drivers.zip
USB_VCOM_Driver.rar
MediaTek_SP_Flash_Tool_V5.1532.00.zip


MyPhone_Rio_Grande_StockRom.zip

 Instructions:
1. Installing Drivers
1.) Download Mediatek Auto Installer and Extract:

Driver Auto Installer
1.1)Just choose your Operating System Win 7/Win8
driver for win7


2.) For Win 10
Install Drivers USB_VCOM_Driver.rar
In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.

Driver Installing
Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.

Driver Location

3.  Now Click on Next and select Install this driver software anyway and wait for finishing the process.

driver installed

4.  After installation is finished then Restart your computer, That's it.
5. Open flash_tool.exe, click on the Download Tab
 Extract the downloaded Stock rom to desktop of your computer.
SPFT LOCATE SCATTER

6. Click Scatter-loading and browse for the scatter file (MT6582_Android_scatter)
locate scatter file

7. For Bootloop only
 Make sure flashing mode is set to "Download Only" and check mark all except Preloader.
Note: If deadboot/hardbrick set "Download+Format" and check Preloader.
8. Click Download.
mt6573 success

9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.
10. Green Circle image with check will show once flashing is completed. That's it!

SPFT SUCCESS

11. Disconnect your phone in USB cord then on your phone! If still bootloop Go to recovery mode
Reboot and press vol up and power On button. Then perform Wipe cache and data or Factory reset!

Note: . After Flashing the ROM, you will be stucked up in MyPhone logo. So follow the steps below.
A. Turn Off the Phone
B. Hold Power + Volume Down
C. Go to Signaling Test, and press Menu button.
D. Wait for a while and you will see selections, choose TEST PASS and REBOOT.





Credits:
Ayie Parrera
Myphone Rio grande user Group
http://androidcribs.com

ليست هناك تعليقات:

إرسال تعليق