How to fix bootloop Myphone My36 via Wiko Fever Firmware

How to fix bootloop Myphone My36 via Wiko Fever Firmware

This tutorial teach you on how to fix bootloop and deadboot for Myphone My36. Since we still no available stockrom for My36 we will use Wiko Fever firmware which OTA of this phone. This already tested of our members. To flash this firmware you need to download all needed requirements. Just follow my instructions carefully.

Requirements:
WIKO FEVER STOCKROM
PC/LAPTOP(WINDOWS OS)
USB CABLE
PHONE

Mediatek Driver

SP_Flash_Tool_v5.1352.01.rar
or
SP_Flash_Tool_v5.1424.00.rar

FOR WINDOWS XP/7 -INSTALLING DRIVERS

1. Download Mediatek Driver and Extract then Install the driver for 32 or 64 bit operating system of windows 7.

2.  Before you plug your phone in PC, you need to focus in Device Manager, then plug your phone without the battery you only have approximately 5 seconds to appear MT65xx device that shows under Other devices, you need to right click it as soon as you see it.

Then after you rightclick, click to Update driver software

3. Then choose - Browse my computer for driver software

Browse the Mediatek MT65xx Preloader Driver folder

Make sure you know the version of OS to choose the right driver for your PC.

Choose your OS version, then choose if 32-bit or 64-bit for your PC.

E.G. s Win7  folder:

usb2ser_Win7.inf - if 32-bit

usb2ser_Win764.inf - if 64-bit

4. Another options, to find right driver for your phone is to open your internet while your phone is connected without the battery and automatically searching driver for your phone.

FOR WINDOWS 8/8.1/10 -INSTALLING DRIVERS

1. Download all necessary files and Enable USB Debugging mode in your phone..

2. Install Drivers USB_VCOM_Driver.rar

In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.

Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.

3.  Now Click on Next and select Install this driver software anyway and wait for finishing the process.

4.  After installation is finished then Restart your computer, That's it.

If still not success in installing driver just Disabled Driver Signature Verification

1. Go to PC Settings>General>Troubleshoot>Advanced Options>Startup Settings>Disabled Driver Signature Enforcement>Then Restart

Once you disabled. Then follow the procedure above to install the driver. Once success proceed to next step.

5. Download SP_Flash_Tool_v5.1352.01.rar and extract then click flash_ tool to open

6. Click Scatter_loading and open your scatter file like image below(I'm using mt6572 scatter File)

7. Check all except preloader. (If your device is hardbrick/deadboot apply check in preloader)

8. Click download

9. Wait until green circle appear

Remove your phone to usb cable then insert your battery and On your android phone..Enjoy!

Note: If not reboot try factory reset in recovery mode of your phone.

How to Root MyPhone My36 and Install TWRP recovery

How to Root MyPhone My36 and Install TWRP recovery

My36 Specs:

5.2-inch Full HD IPS display w/ Gorilla Glass 3
1.3GHz Octa-core 64-bit processor
3GB of RAM
16GB internal memory, w/ microSD support up to 64GB
13-megapixel rear camera
5-megapixel front-facing camera
4G LTE
Dual-SIM / Dual-Standby
2900mAh battery
Android Lollipop

Finally we made Rooting Procedure and Flashing TWRP and CWM recovery for MYphone My36. In this tutorial I have 2 method for Rooting. It's up to you of what you prefer. Just try the first method if not work proceed the 2 method.

Warning! Rooting can void your warranty!. DO it at Your own risk!

FIRST METHOD

Rooting via PC and Flash via SPFT

Requirements:

PC

USB Cable

Download Links:
Mediatek VCOM Drivers:

 Click Here

SP Flash Tool:

Click Here

My 36 TWRP & Scatter File:

Click Here
My 36 CWM & Scatter File:
Click Here

BETA-SuperSU-v2.52.zip:

Click Here

 Instructions

1. Download all necessary files and Enable USB Debugging mode in your phone..

2. Install Drivers USB_VCOM_Driver.rar

In Device Manager Right click on PC name(Right Side) and then click on Add legacy hardware as shown in image below.

Now in Add Hardware Wizard click on Next » Install the Hardware that i manually select from a list (Advanced) » Show All Devices » Next » Have a Disk, Now select the any inf file from where you extracted the downloaded VCOM driver package.

 Now Click on Next and select Install this driver software anyway and wait for finishing the process.

    After installation is finished then Restart your computer, That's it.

3. Extract SPFlash tool and flash2_twrp.zip

4. Copy the BETA-SuperSU-v2.52.zip to your phone.

5. Open flash_tool.exe, click on the Download Tab

6. Click Scatter-loading and browse for the scatter file(included in the My36 TWRP+Scatter file) (MT6753_Android_scatter)

7. Make sure flashing mode is set to "Download Only" and check mark only on the Recovery.

8. Click Download.

9. Turn off your phone, connect your phone to the PC and wait for the flashing to commence.

10. Green Circle image will show once flashing is completed.

11. Important: Disconnect your phone from the computer, press and hold Vol Up + Power.

12. Boot menu will show, select Recovery.

From the custom recovery (TWRP), it is recommended to backup your phone first, before rooting.

To root:

1. Reboot your  phone then press and hold Vol Up + Power On

 the TWRP Recovery , click Install.

2. Select BETA-SuperSU-v2.52.zip.

3. Flash it, no need to wipe cache, you can reboot as it is.

4. Enjoy your rooted  MY36.

Then download Root checker in Playstore to verified.

SECOND METHOD

Download all:

1. Adb drivers

(run exe file to load needed drivers)

2. Vcom drivers: .. (install sa pc)

3. Minimal Adb fastboot tool

(extract the file then copy to desktop)

4. TWRP

    CWM

5. SuperSu.zip

(copy this to your root directory of sdcard(sa labas lang ng sdcard wag sa mga folder ok)

PROCEDURE:

1) Unlock bootloader:

1.1) Boot for first time your device. I recommend to NOT register/login/add Wifi/add accounts/etc., because the unlock process DELETES all your data in the device. So to go more fast, skip all, and go directly to SETTINGS. In section ABOUT DEVICE, enable the developer options with eight time picks over “Build number”. Then in SETTINGS/DEVELOPER OPTIONS, enable the option “OEM unlocking”. Then power off.

1.2) Boot your device to Fastboot mode (hold power button and vol up) choose fastboot mode or boot into bootloader), then connect your phone to PC via USB cable. Open folder fastboot from minimal adb fastboot tool(run as administrator)

Click Run me.bat

Execute in your computer the command “fastboot oem unlock”, say YES with “vol+” and “power” buttons. Then select reboot. This ERASES completely your device (factory restore), but the bootloader will be UNLOCKED! Two reboots needed.

2) Install custom Recovery:

2.1) Download from here choose any of these two: TWRP or CWM TWRP: Click Here

CWM: Click Here

 copy this recovery.img inside (minimal adb fastboot tool folder)

2.2) Boot in the BOOTLOADER mode. Then execute command “fastboot flash recovery recovery.img”; 

and then “fastboot reboot”.

3) Rooting:

3.1) Copy last beta of SuperSU v2.52 to your SD Card (file BETA-SuperSU-v2.52.zip).
Click Here

3.2) Boot in the CWM with “Vol+” and “Power” buttons.

3.3) Install ZIP from external-sd card.

3.4) Reboot and don’t select “fix root”, only “Yes”.

3.5) After boot, start SuperSU and configure it. Root done!

Then download Rootchecker in Playstore to verified!



Disclaimer:
Please give proper credits in my blog and Do not reupload, Instead share this link! Thank You!

Credits:
Carliv
XDA
Chainfire
Wiko Fever
Manos78